Een moment geduld aub...

Home    //    Webshop    //    Sanding, Cutting & Milling

Sanding, Cutting & Milling

Scuff Pads, 150 mm x 230 mm The high quality Scuff Pads are especially designed for hand sanding tasks prior to applications of finishing coat, primer or lacquer. Can be used on painted surfaces, but also on plastics, wood and... View product € 26,00 Scuff Discs Ø 150 mm The high quality Colad Scuff Pads are especially designed for machine application tasks. Prior to applications of finishing coat, primer or lacquer.     Art. no. 38500800 Type A, Very Fine... View product € 14,50 Scuff Rolls The high quality Scuff Rolls are especially designed for both manual or machine use. Prior to applications of finishing coat, primer or lacquer. Can be used on painted surfaces, but also on... View product € 28,50 Sanding Discs Premium, 6 + 1 Hole High quality Sanding Discs, very well suited for machine sanding at high speeds during all stages of the repair process. Designed for the aviation industry for sanding: paint, primers, fibers and... View product € 23,00 Sanding Discs Premium, 8 + 6 + 1 Hole High quality Sanding Discs, very well suited for machine sanding at high speeds during all stages of the repair process. Designed for the aviation industry for sanding, paints, primers and... View product € 23,00 Waterproof Sanding Sheets 230 x 280 mm These Waterproof Sanding Sheets are designed for wet sanding and polishing of paint and primers. The Sanding Sheets remove scratches from the painted surface. After removing the scratches simply... View product € 25,00 Sanding Cork Block made of cork for wet or dry sanding.   Three layers of natural cork, sealed together. On one side the edges are sharp for precise application and on the other side the edges are shaped... View product € 64,00 Foam Sanding Pads Highly flexible sanding pads for hand sanding. Can be used for wet or dry sanding to sand parts that machines cannot reach. Long-lasting product.   This Colad Foam Sanding Pad is flexible... View product € 13,80 Soft Flex Rolls 115 mm x 25 m Sanding paper on foam backing. Specially for sanding intricate parts. Can be used wet or dry. Roll of 25 m long with perforated pieces. Size of the perforated pieces 125 x 115... View product € 47,00 Rubber Eraser Pad Specially designed to remove pinstripes, stickers & decals, car lettering, glue residue, attachment tape and foil from paint and chrome surfaces.   The pad can withstand up to 4000 RPM and... View product € 15,50 One-Hand Orbital Sander HD One-Hand Orbital Sander coming in 2 versions: 2.4 mm and 5 mm. Specially designed for sanding fine grits, paint, composites, wood, mastic and primers.   Maximum result because of an extreme fine... View product € 235,00 Random Orbital Pneumatic Sander EHP Perfect tool for the final sanding process. Optimal performance with Ø 3 mm or Ø 5 mm. Equipped with a useful digital air pressure read-out   Technical specifications: Air pressure: max... View product € 409,00 One-Hand Random Orbital Sander Alpha A light, powerful orbital sander with a sanding pattern of 3mm. It’s high torque low RPM character makes it the best machine for a fine finish. The Alpha machines have low air consumption (ca... View product € 319,00 Sander DS 40 Random Orbital Micro. 3.0 - 30 mm pad Pneumatic mini random orbital sander for efficient polishing of paint defects The small support pad is easy to mount by turning it in the machine shaft. Due to the small eccentric movement of this... View product € 242,00 DS 70 Rotating Polishing Machine 70 mm pad Compact Ø 70 mm pneumatic rotating polishing machine for efficient polishing of paint defects. The DS 70 is especially designed for the preparation process.   Great... View product € 242,00 Sander PHP 165 VD Planetary Pneumatic 150 mm The PHP 165 VD is especially designed for the preparation process. The machine is well balanced and come with a low noise level (< 81 dBa). Because of the very high sanding capacity and modern... View product € 409,00 Sander PHP 300 VD Planetary Pneumatic 200 mm The PHP 300 VD is especially designed for the preparation process of larges surfaces. The machine is well balanced and come with a low noise level (< 81 dBa). Because of the very high sanding... View product € 459,00 Orbital Pneumatic Sander EHP 300 V Random 5 mm - 200 mm pad Perfect tool for the final sanding process of large surfaces. Optimal sanding marks through the 5 mm sanding diameter. Equipped with a useful digital air pressure read-out. 5 mm - 200 mm pad... View product € 459,00 Mini pad (Hook and Loop) Ø 30 mm View product € 20,50 Support pad (Hook and Loop) Ø 70 mm Support pad (Hook and Loop) Ø 70 mm. View product € 20,50 Machine Oil Machine/ Lubricating oil for pneumatic equipment is specially developed for the lubrication and maintenance of pneumatic tools. This lubricant provides high protection against icing by emulsifying... View product € 4,90 Acrats
choice
DRACO Battery metal shears Product description   ACCU Metal Shears System 3000   Battery: powerful battery MXL 12 Volt / 3 Ah / 36 Wh   Charger: RC Power Base is characterized by the computer-controlled... View product € 927,00
High Performance Angle Grinder, 75 mm Wheel This high performance comes in a very compact body, has a wheel diameter of 3". weighs just 300 grams and has a free speed of 18.000 RPM!  Ergonomic comfort grip provides superb operator... View product € 1.059,00 High Performance Angle Grinder, 115 mm Wheel This high performance comes in a very compact body with great ergonomics, has a wheel diameter of 4.5". weighs just 1750 grams and has a free speed of 12.000 RPM!  Ergonomic comfort grip provides... View product € 1.304,00 High Performance Angle Grinder, 125 mm Wheel This high performance comes in a very compact body with great ergonomics, has a wheel diameter of 5" and weighs just 1900 grams and has a free speed of 12.000 RPM!  Ergonomic comfort grip provides... View product € 750,00 High Performance Angle Grinder, 150 mm Wheel This high performance comes in a very compact body with great ergonomics, has a wheel diameter of 5" and weighs just 1900 grams and has a free speed of 12.000 RPM!  Ergonomic comfort grip provides... View product € 789,00 High Performance Angle Grinder, 230 mm Wheel This high performance comes in a very compact body with great ergonomics, has a wheel diameter of 9" and weighs just 3200 grams and has a free speed of 6000 RPM!  Ergonomic comfort grip provides... View product € 1.817,00 Lightweigth & Ergonomic Rotary Sander up to 50 mm - 2" This high performance rotary sander comes in a very compact body with great ergonomics, with a total length of 6.1",weighs just 835 grams and has a free speed of 25.000 RPM!  Ergonomic comfort grip... View product € 320,00 Compact & Lightweight Rotary Sander up to 75 mm - 3" This compact and lightweight rotary sander comes in a very compact body with great ergonomics, with a total length of 4" and a weight of just 680 grams and a free speed of 15.000 RPM!  Ergonomic... View product € 158,00 Sanding Cart A workstation for storing products or equipment. Suitable for sanding or polishing materials. Supplied with antislip material and drawer lock. Fitted with 4 strong wheels. Per piece. Not assembled. View product € 382,00 Sanding Cart - Holder for garbage bag Accessory Sanding Cart, for holding garbage bag. View product € 13,80 Sanding Cart - Holder for 4 spray cans Accessory to Sanding Cart, holder for 4 spray cans. View product € 15,50 Trash bags 250 L Plastic trash bag for the Hamach Waste Bin. Volume 250 L. 25 pieces per roll. Per roll. View product € 17,00 HiVac Dynorbital-Spirit Orbital Sander 3" (76 mm) Great Feautures: 3" (76) diameter Central Vacuum HiVac Dynorbital-Spirit efficiently vacuums through 6-hole sanding pad and unique shroud design. Ergonomically designed to the highest... View product € 329,00 X32V 3" (76 mm) Dia. Cen-Vacuum Dynorbital® Mini Extreme Random Palm Orbital Sander Great Feautures: Integrated speed control allows for fine adjustment of RPM for artistic results, sensitive workpieces, or when sanding/repairing a coated surface. Ultra-lightweight, just... View product € 300,00 Dynafile II Abrasive Belt Tool .4 hp Dynafile II adds a lightweight, compact variation to Dynabrade?s famous Abrasive Belt Tool line. Includes 11203 Contact Arm, for coated abrasive belts 1/2" wide x 18" long. Grind, deburr,... View product € 692,00 Vacuum Dynafile II Abrasive Belt Tool Vacuum Dynafile II allows you to vacuum while you work. Highly portable vacuum system works on tool's exhaust.   Great Features:   Includes self-contained 'bag-within-bag' dust... View product € 939,00 Dynastraight Finishing Tool Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.     Great Features:     4,500... View product € 782,00 Dynastraight Flapper Finishing Tool Dynastraight Flapper Air-Powered Abrasive Finishing Tool is ideal for polishing insides of pipe and tubing. Also excellent for light deburring. Remove rust, oxide and scale; clean welds, remove... View product € 433,00 Dynastraight Flapper 8" (203 mm) Extension Finishing Tool Dynastraight Flapper Air-Powered Abrasive Finishing Tool is ideal for polishing insides of pipe and tubing. Also excellent for light deburring. Remove rust, oxide and scale; clean welds, remove... View product € 730,00 Rolling Pin Sander This Air-Powered Abrasive Finishing Tool is ideal for sanding and finishing on contoured shapes.   Great Features: 3,200 RPM, .4 hp. Unique offset handle to control torque. Includes... View product € 1.188,00 4 hp Straight-Line Pencil Grinder This advanced Pecil Grinder has an integrated collet, various collet sizes available.High-efficiency rotary vane air motor models are ideal for precision deburring and finishing on a variety of... View product € 497,00 Straight-Line Pencil Grinder .1 hp 50,000 RPM This advanced Pecil Grinder has an integrated collet, various collet sizes available. Turbine-Driven Air Motor Models are ideal for precision deburring and finishing on a variety of... View product € 490,00 Straight-Line Pencil Grinder .1 hp 100,000RPM This advanced Pecil Grinder has an integrated collet, various collet sizes available. Turbine-Driven Air Motor Models are ideal for precision deburring and finishing on a variety of... View product € 570,00 Straight-Line Pencil Grinder, Central Vacuum .1 hp 35,000RPM This advanced Pecil Grinder has an integrated collet, various collet sizes available. Turbine-Driven Air Motor Models are ideal for precision deburring and finishing on a variety of... View product € 547,00 Straight-Line Pencil Grinder, Central Vacuum . 1hp 50,000RPM This advanced Pecil Grinder has an integrated collet, various collet sizes available. Turbine-Driven Air Motor Models are ideal for precision deburring and finishing on a variety of... View product € 547,00 Straight-Line Pencil Grinder, Central Vacuum . 1 hp 60,000RPM This advanced Pecil Grinder has an integrated collet, various collet sizes available. Turbine-Driven Air Motor Models are ideal for precision deburring and finishing on a variety of... View product € 547,00 7 Degree Offset Die Grinder . 4 hp A 7 Degree Offset Die Grinder with one-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels for enhanced operator... View product € 545,00 Angle-Head Die Grinder .4 hp .4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life!... View product € 531,00 Right Angle Die Grinder, Central Vacuum . 4 hp This Dynabrade .4 hp Vacuum Right Angle Die Grinder is ideal for rapid material removal on metallic and composite structures and for surface finishing. This Dynabrade comes in two models: 12000 RPM... View product € 674,00 Straight-Line Die Grinder, Central Vacuum .4 hp This Dynabrade .4 hp Vacuum Die Grinder is ideal for rapid material removal on metallic and composite structures and for surface finishing. This Dynabrade comes in two models: 5000 RPM and 25000... View product € 408,00 Straight-Line Die Grinder, Central Vacuum . 7hp Dynabrade .7 hp Vacuum Die Grinders are ideal for rapid material removal, finishing, removing parting-lines & flash. For use with carbide burrs, rotary files, mounted points, roll cartridges,... View product € 583,00 7 Degree Offset Die Grinder, Central Vacuum .7 hp .7 hp Vacuum Die Grinders for connection to central vacuum systems. Achieve rapid material removal with source capture. Gearless for less maintenance.   Great Features: .7 hp (522 W)... View product € 674,00 Straight-Line Die Grinder, Central Vacuum .1 hp 1.0 hp (744 W) Straight-Line Vacuum Die Grinder for connection to central vacuum systems. Achieve rapid material removal with source capture. Gearless for less maintenance.   Great... View product € 636,00 7 Degree Offset Disc Sander 2" (51 mm) Dia. This 7 Degree Offset Disc Sander includes 51344 Locking-Type Pad (2" diameter).   Great Features: Handle is offset 7 degree for greater operator comfort and control. Gearless for reduced... View product € 487,00 Right Angle Disc Sander 4" (102 mm) Dia. This Right Angles Disc Sander Includes a  50192 locking-type Backing Pad, 4" (102 mm) in diameter   Great Features: Dynabrade's 1.3 hp (970 W) Right Angle Sander offer countless grinding... View product € 718,00 7 Degree Offset Disc Sander, Self-Generated Vacuum 2" (51 mm) Dia. Flexible 7 Degree Offset Disc Sander with non-marring Vacuum Shroud allows capture of dust, debris, and contaminants such as Hexavalent Chromium.   Great Features: Each model includes... View product € 583,00 7 Degree Offset Disc Sander, Central Vacuum 2" (51 mm) Dia. Flexible 7 Degree Offset Disc Sander with non-marring Vacuum Shroud allows capture of dust, debris, and contaminants such as Hexavalent Chromium.   Great Features: Each model includes... View product € 583,00 Right Angle Disc Sander, Self-Generated Vacuum 2" (51 mm) Dia. Flexible Right Angle Disc Sander with non-marring Vacuum Shroud allows capture of dust, debris, and contaminants such as Hexavalent Chromium.   Great Features: Each model includes 51344... View product € 718,00 Right Angle Disc Sander, Central Vacuum 2" (51 mm) Dia. Flexible Right Angle Disc Sander with non-marring Vacuum Shroud allows capture of dust, debris, and contaminants such as Hexavalent Chromium.   Great Features:   Each model includes... View product € 718,00 Right Angle Disc Sander, Central Vacuum 3" (76 mm) Dia. Powerful .4 hp (298 W) Air Motor for Smooth, Controlled Sanding. Unique Vacuum Shroud Diverts Dust and Debris to Vacuum Source. For Use With 3" (76 mm) Diameter Locking-Type Abrasive... View product € 701,00 Right Angle Disc Sander, Central Vacuum 5" (127 mm) Dia. Central Vacuum Model (52596) includes Dynabrade 1.3 hp Disc Sander (52635) with Vacuum Shroud (52744). Tool includes Backing Pad (51150) which has a 5" (127 mm) diameter, plus mounting hardware... View product € 790,00 Right Angle Vacuum Cut-Off Wheel Tool 3" (76 mm) Dia. Vacuum Cut-Off Wheel Tool, for efficient cutting with dust and debris removal.   Great Features: 3" Diameter, Right Angle, .4 hp, 12,000 RPM, Rear Exhaust. Ideal for use with optional 3"... View product € 801,00 Straight-Line Vacuum Extension Cut-Off Wheel Tool 3" (76 mm) Dia. Vacuum Cut-Off Wheel Tool, for efficient cutting with dust and debris removal.   Great Features: Ideal for 3" Dia. Diamond Cut-Off Wheels. Model accepts optional 4" diameter Type 1... View product € 1.143,00 Straight-Line Central Vacuum Flush Cut-Off Wheel Tool 3" (76 mm) Our Air Powered, 3" (76 mm) Dia., Straight-Line, Flush Cut-Off Wheel Tool is ideal for Central Vacuum Systems. The unique shroud and Flange design adds versatility. This too has plenty of power, .7... View product € 706,00 Stockade Reciprocating Sander This Stockade Reciprocating Sander has a 5" long x 1/2" wide spring-steel extender which accepts stick-on coated abrasive strips (sold separately).   Great Features: 80 and 180 grit... View product € 1.207,00 Stockade Reciprocating Saw Tool includes 12212 Saw Holder Adapter, 12183 Saw Guide, 90935 General Purpose Saw Blade.   Great Features: Built-in air flow regulator. Countless applications on wood, metal,... View product € 1.223,00 Dynadie III Reciprocating Filer This Dynadie III Reciprocating Filer accepts 1/4" dia. or 1/8" diameter shanked files. Files sold separately.   Great Features: Replaces tedious hand filing. Easily enters narrow slots... View product € 967,00 Router .7 hp This Router is ideal for chamfers and roundover cuts on hardwoods, softwoods, solid surfaces or plastics. Great for laminate trimming, surface planing, beveling and cornering.   Great... View product € 595,00 File Board Sander, Non-Vacuum 2-3/4" W x 11" L (70 mm x 279 mm) This File board Sander isexcellent for industrial graining of stainless steel   Great Features: Tool features high quality gear for smooth-running in-line sanding action. 2,400 strokes... View product € 965,00 Dynaline Sander, Self-Generated Vacuum 2-3/4" W x 8" L (70 mm x 203 mm) 2,400 strokes per minute at 90 PSIG (6.2 Bar). 3/8" (10 mm) stroke length.   Great Features: Ready for connection to optional portable self-contained dust collection systems. Includes... View product € 742,00 Dual-Grip Random Orbital Sander for ESD, 6" (152 mm) Dia., Central Vacuum Designed for large, high-volume sanding applications, dual-grip, Random Orbital Sanders provide an added layer of protection against static shock.   Great Features: Dual grip locking... View product € 626,00 Central Vacuum Dual-Grip Random Orbital Sander for ESD 6" (152 mm) Dia. Designed for large, high-volume sanding applications, dual-grip, Random Orbital Sanders provide an added layer of protection against static shock.   Great Features: Dual grip locking... View product € 970,00 Dual-Grip Gear Driven Sander for ESD 8" Central Vacuum models are designed for use with central vacuum system or external vacuum source. Includes combination lip-seal shroud-overskirt, which allows greater workpiece visibility and... View product € 1.008,00 Powerfile sanding belt CS 310 XF 10 mm x 330 mm (B x L) Universal type of band for processing curves and contours. 25 pieces   Areas of Application: RVS Steel Metal Universal Non- Ferro Metals   Features: Binder:... View product € 24,25 Powerfile sanding belt CS 310 XF 13 mm x 450 mm ( B x L) Universal type of band for processing curves and contours. 25 pieces   Areas of Application: RVS Steel Metal Universal Non- Ferro Metals   Features: Binder:... View product € 26,25 Powerfile sanding belt CS 310 XF 13 mm x 455 mm ( B x L) Universal type of band for processing curves and contours. 25 pieces   Areas of Application: RVS Steel Metal Universal Non- Ferro Metals   Features: Binder:... View product € 26,25 Powerfile flexible sanding belt CS 310 XF 10 mm x 330 mm (B x L) Flexible but tear resistant of band for processing molded parts and weld seams 25 pieces   Areas of Application: RVS Steel Non- Ferro Metals   Features: Binder:... View product € 25,75 Powerfile Abrasive belt NBF 800 10 mm x 330 mm (B x L) Special for deburring, leveling, frosting and roughening surfaces. 10 pieces   Areas of Application: RVS Metal Universal Non- Ferro Metals   Features: Binder:... View product € 18,60 Powerfile Abrasive belt NBF 800 13 mm x 457 mm (B x L) Special for deburring, leveling, frosting and roughening surfaces. 10 pieces   Areas of Application: RVS Metal Universal Non- Ferro Metals   Features: Binder:... View product € 24,00 Extension Die Grinder .4 hp 3" (76 mm) Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 3" (76 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and... View product € 748,00 Stud Grinding Wheel 40 Grit Universal product for steel and RVS worktops with a uniform stock removal rate. Perfect for hard-to-reach places!     Areas of Application: RVS Metal... View product € 29,70 Stud Grinding Wheel 60 Grit Universal product for steel and RVS worktops with a uniform stock removal rate. Perfect for hard-to-reach places!     Areas of Application: RVS Metal... View product € 29,70 Stud Grinding Wheel 80 Grit Universal product for steel and RVS worktops with a uniform stock removal rate. Perfect for hard-to-reach places!     Areas of Application: RVS Metal... View product € 29,70 Stud Grinding Wheel 100 Grit Universal product for steel and RVS worktops with a uniform stock removal rate. Perfect for hard-to-reach places!     Areas of Application: RVS Metal... View product € 30,60 Stud Grinding Wheel 120 Grit Universal product for steel and RVS worktops with a uniform stock removal rate. Perfect for hard-to-reach places!     Areas of Application: RVS Metal... View product € 29,80 Stud Grinding Wheel 150 Grit Universal product for steel and RVS worktops with a uniform stock removal rate. Perfect for hard-to-reach places!     Areas of Application: RVS Metal... View product € 30,60 Stud Grinding Wheel 180 Grit Universal product for steel and RVS worktops with a uniform stock removal rate. Perfect for hard-to-reach places!     Areas of Application: RVS Metal... View product € 30,60 Stud Grinding Wheel 240 Grit Universal product for steel and RVS worktops with a uniform stock removal rate. Perfect for hard-to-reach places!     Areas of Application: RVS Metal... View product € 30,00 Stud Grinding Wheel 320 Grit Universal product for steel and RVS worktops with a uniform stock removal rate. Perfect for hard-to-reach places!     Areas of Application: RVS Metal... View product € 33,80 Stud Grinding Wheel for RVS - 60 Grit Cooled sanding through multi-joined - increased stock removal rate on RVS     Areas of Application: RVS   Features: Binder: Syntetic resin Type of grain: Aluminium... View product € 35,20 Acrats
choice
Quick Change Disc QRC 412 Klingspor Areas of application: metal universal non-ferrous metals   Unit number 100 pcs. View product € 79,70
Quick Change Disc QRC 411 Klingspor Areas of application: stainless steel metal universal     Unit number 100 pcs. View product € 86,80